We all want to live in clean habitable environments. Keeping the floor looking nice and clean can be a little challenging especially when you don’t have a clue how to approach the process. The cleaning process involves some degree of preparation;the right cleaning products have to be bought and arrangements have to be made to have on site good cleaning equipment. While the act of cleaning itself may be a rather straightforward process,there are some attendant procedures such as floor stripping and waxing that may require a certain degree of experience and technical knowledge.If you have the skills and know all the right cleaning supplies that are needed to get a floor as clean as possible,you can do it yourself. For those people without the time or the experience to handle the processes,there are trustworthy floor maintenance technicians who will be more than happy to solve this problem in Lubbock. In this article,you will learn a few things about each of the three processes.
Sweeping and dusting a floor is usually all you need to do to get your floor looking clean and glossy. Get into the habit of cleaning off spills and messes as soon as they happens to avoid having to do a heavier job later on. Use vacuum cleaners in places with a lot of dirt and mess.
Floor mats in places where traffic is heavy helps to preserve your floor. You could use your regular nail polish remover to eliminate tough floor stains. Note that your floor type determines the kind of mop or brush you use on it. For industrial floors,you can use a high power scrubber. Ask your retailer for advice on the best cleaning solution for your specific floor surface.
Let’s talk about stripping now. This process removes deep scratches or dirt that has become embedded onto the surface. Have the right equipment and clothing and make sure that there is adequate ventilation before you can start applying the stripping chemical on the surface. Carefully apply the stripping chemical to the floor evenly using a mop. Use a well running scrubber to remove any wax from earlier treatments that could have become accumulated on certain places on the floor. A squeegee is the best tool to remove the stripper solution as well as the wax buildup. Clean your floor using a mop and water and allow it to dry.
Use a clean mop head to apply evenly a thin coat of wax on the floor.starting from inside towards outwards the exit. You will typically need to apply 2-5 layers of wax on your floor;repeat the process only when the previous layer has dried up. Buffing is finally done to give the floor a clean,fresh,shiny gloss that makes it look fabulous.
If all this sounds too much and involving,it is because it’s involved and that’s why you want to work with skilled floor maintenance professionals in Lubbock.